If you work in a warehouse, this scene probably feels familiar: incoming goods waiting on one side, orders ready to ship on the other, and plenty of trips back and forth with a pallet truck. On quieter days, your trusty hand pallet truck may do the job just fine. But when orders pile up, loads get heavier, and you’re moving goods all day, that work takes effort. Imagine having a little help with moving the truck and lifting each pallet, while you walk alongside and guide it where it needs to go. That’s where the HYSTER Power Pallet PC1.5 comes in. This 1.5-tonne electric pallet truck is worth getting to know if you’re looking to make everyday material handling less demanding.
Meet the PC1.5 The HYSTER PC1.5 is a walk-behind electric pallet truck. You operate it using the control handle, with electric power helping you move forwards and backwards, raise the forks, and lower them again. Instead of manually pulling or pushing the truck and pumping the handle to lift a pallet, you use the controls to get things moving. That means less physical effort during tasks you repeat throughout the day. The PC1.5 has a rated capacity of 1,500 kg at a 600 mm load centre. It lifts pallets clear of the floor so you can move them between work areas, such as from goods receiving to a holding area, or from packing to dispatch. For placing pallets on high storage racks, you’ll need a different type of lift truck suited to that job.
A Little Help Makes a Difference on Busy Days
The effort involved in moving goods doesn’t always come from one particularly heavy pallet. Sometimes, it’s the repeated pulling, pushing, and lifting that adds up over a shift. The PC1.5 brings electric assistance to those everyday movements. You still walk with the truck, control its direction, and keep an eye on the route, while the powered drive reduces the effort needed to move it. Think about a morning spent receiving deliveries, followed by an afternoon moving orders into position for dispatch. Using less effort on each trip can make a practical difference to that routine. If your business is considering a move from manual to electric pallet trucks, a useful starting question is: “How many pallet trips do we make each day?” The answer can help you work out where powered assistance would be most useful.
Compact Enough to Consider—Sized to Fit Your Space
Warehouse space fills up quickly with racking, holding areas, and corners to navigate. Choosing a truck means looking beyond its load capacity. The HYSTER PC1.5 has a compact design, with the brochure listing a weight of approximately 120–125 kg including the battery, depending on the configuration. It also features Up-Right Drive, which allows the truck to move with the control handle in an upright position, helping with manoeuvring in confined spaces. Before choosing a truck, measure your aisles, take a few photos of tight turns, and check your pallet dimensions. Different warehouses may need different fork sizes and turning space. A few simple measurements can make it much easier to choose the right fit from the start.
A Removable Battery Helps You Plan Around the Work
The PC1.5 uses a 48V lithium-ion battery, with 10Ah and 15Ah capacities listed in the brochure, depending on the selected configuration. A recharge alert lets the operator know when charging is needed. The battery is removable, too. With a charged spare ready to use, you can reduce the time spent waiting for a battery to recharge during the working day. What about the question everyone asks: “Will one charge last all day?” That depends on how you use the truck, including load weight, travel distance, the number of trips, and battery capacity. This brochure does not specify a fixed operating time per charge. Let your supplier know how many hours you work each day and what your typical loads look like. That information helps you choose a battery and charging arrangement that fits your routine.
Useful Information, Right on the Handle
The LCD display on the control handle lets operators check the battery level and operating hours. It also displays fault codes when the truck reports an issue. Frequently used controls—including forward and reverse travel, lifting, lowering, and the horn—are grouped around the same handle. If an alert appears, the operator has useful information to pass on to the maintenance team. Daily checks and operation should still follow the truck’s manual.
Could an Electric Pallet Truck Fit Your Warehouse?
The HYSTER PC1.5 is worth considering if your operation looks something like this: You use a hand pallet truck for multiple trips throughout the day. You want to reduce the effort involved in pulling, pushing, and manually lifting pallets. Most of your work involves moving pallets at floor level. You need a compact walk-behind truck.Your goods and pallets fall within the truck’s rated capacity. If your site has ramps, changes in floor level, or special operating conditions, ask your supplier to check suitability before making a decision. You don’t need to start with a long technical specification. Just have your load weights, pallet dimensions, photos of the workspace, and daily operating hours ready. Those details make the conversation much easier.
Talk to Dilok and Sons About the HYSTER PC1.5
When choosing material handling equipment, it helps to have both a truck that fits the job and someone to contact when questions come up.
Dilok and Sons Co., Ltd., part of DSL Group, supplies forklifts and material handling equipment, including HYSTER sales and services in Thailand. You can learn more on the About Dilok and Sons page. If you’re looking for a 1.5-tonne electric pallet truck, share your working requirements with the team and ask about the HYSTER Power Pallet PC1.5. Discuss fork sizes, battery options, equipment, and pricing to find a configuration that suits your day-to-day operation. When moving pallets is part of every working day, finding a way to make it less demanding is worth a closer look.
Contact Dilok and Sons Co., Ltd. about the HYSTER PC1.5
Phone: 02-769-3000


